Name: Explore Intel Edison (en Inglés)
Price: 26330.00 CLP
Availability: InStock
Author: Fairhead, Harry
ISBN: 9781871962444

portada Explore Intel Edison (en Inglés)

Formato

Libro Físico

Autor

Harry Fairhead

Editorial

I/O Press

Idioma

Inglés

N° páginas

202

Encuadernación

Tapa Blanda

Dimensiones

23.5 x 19.1 x 1.1 cm

Peso

0.35 kg.

ISBN13

9781871962444

Categorías

Dispositivos y materiales electrónicos

Explore Intel Edison (en Inglés)

Harry Fairhead (Autor) · I/O Press · Tapa Blanda

Libro Nuevo

$ 26.330

$ 47.880

Ahorras: $ 21.550

45% descuento

Envío normal

Origen: Estados Unidos (Costos de importación incluídos en el precio)

Se enviará desde nuestra bodega entre el Viernes 26 de Julio y el Miércoles 07 de Agosto.

Lo recibirás en cualquier lugar de Chile entre 1 y 3 días hábiles luego del envío.

Reseña del libro "Explore Intel Edison (en Inglés)"

The Intel(R) Edison is a remarkable device. It is as small as an embedded processor, but has enough power to allow it to be used as a tiny server. With its built-in support for WiFi, GPIO, I2C and SPI it is a capable IoT device. However, to make use of its unique qualities you have to take a step beyond its simple Arduino emulation and make use of it as itself, in its native mode. This means using the mini-breakout board and dealing with the fact that it is a 1.8V logic device and programming it using C to bring out its full power. Once you know how, this isn't as difficult as it seems at first. The rewards are well worth the effort. Exploring Intel(R) Edison starts with setting it up for the mini-breakout board. Then it looks at the advantages of choosing C as the language in which to program it, showing how to set up the Intel(R) System Studio IoT Edition IDE. Now we are ready to get building circuits and coding. Using the mraa library is the direct way to work with the GPIO lines and we need to master it before looking at ways of making things faster with memory-mapped I/O, achieving realtime facilities with Linux and using pulse width modulation. From here we are able to start connecting sensors - the HTU21D (I2C), DHT11/22 (custom) and the DS18B20 (1-wire). There are problems to overcome along the way - how to convert from 1.8V to work with higher voltages and how to support a 1-wire bus. The final circuit, to add AtoD, uses the SPI bus and implements a software emulation. Finally we look beyond mraa with a Linux-based approach to working with GPIO lines and how to set the GPIO mode.