Name: Influence of Prosopis Juliflora Wood Flour in Poly Lactic Acid - Developing a Novel Bio-Wood Plastic Composite (en Inglés)
Price: 39510.00 CLP
Availability: InStock
Author: Kannan, Thanneerpanthalpalayam Kandasamy ; Rajasekar, Rathanasamy ; Raj, Sachin Sumathy
ISBN: 9781636481197

portada Influence of Prosopis Juliflora Wood Flour in Poly Lactic Acid - Developing a Novel Bio-Wood Plastic Composite (en Inglés)

Formato

Libro Físico

Autor

Thanneerpanthalpalayam Kandasamy Kannan

Rathanasamy Rajasekar

Sachin Sumathy Raj

Editorial

Eliva Press

Idioma

Inglés

N° páginas

Encuadernación

Tapa Blanda

Dimensiones

22.9 x 15.2 x 0.2 cm

Peso

0.07 kg.

ISBN13

9781636481197

Categorías

Tecnología: cuestiones generales

Influence of Prosopis Juliflora Wood Flour in Poly Lactic Acid - Developing a Novel Bio-Wood Plastic Composite (en Inglés)

Thanneerpanthalpalayam Kandasamy Kannan (Autor) · Rathanasamy Rajasekar (Autor) · Sachin Sumathy Raj (Autor) · Eliva Press · Tapa Blanda

Libro Nuevo

$ 39.510

$ 71.840

Ahorras: $ 32.330

45% descuento

Envío normal

Origen: Estados Unidos (Costos de importación incluídos en el precio)

Se enviará desde nuestra bodega entre el Viernes 02 de Agosto y el Miércoles 14 de Agosto.

Lo recibirás en cualquier lugar de Chile entre 1 y 3 días hábiles luego del envío.

Reseña del libro "Influence of Prosopis Juliflora Wood Flour in Poly Lactic Acid - Developing a Novel Bio-Wood Plastic Composite (en Inglés)"

A Bio composite comprising Prosopis Juliflora Fiber (PJF) and Poly Lactic Acid (PLA) was processed considering two particulate sized reinforcements, coarse PJF (avg. 15 μm) and fine PJF (10-50 nm). They were added individually at ratios of 10, 15, 20 and 25 wt% into PLA matrix. The composites were extruded and tested for mechanical properties. The addition of PJF resulted with an increase in the tensile, flexural and impact strengths of the polymer. Adding PJF to PLA showed a decrease in the hardness of the polymer. Water Absorption test showed an increase in water uptake with increasing fiber content. The most optimum ratio of PLA to PJF was found to be 80:20. The fine PJF reinforced composites proved to be superior over the coarse PJF reinforced composites at all stages of the research. FESEM and TGA were used to study morphology and thermal characteristics respectively.